Required Tools
- Phillips screwdriver (manual or low-torque electric)
- Rubber mallet
- Soft cloth or mat to protect surfaces
- Measuring tape and level
- Optional: Cordless drill with clutch set low
Pre-Assembly Checklist
- Clear a large work area and lay out a protective mat.
- Unbox and verify all panels and hardware using the included parts list.
- Read the manufacturer’s instructions end-to-end once.
- Group similar screws and fittings in small containers.
- Keep the product facing and orientation consistent throughout.
Step-by-Step Assembly
These steps summarize the optimal sequence for most modern MDF TV stands with internal storage and cable management.
1. Build the Base Frame
Start with the bottom panel and attach side panels using dowels and cam locks. Hand-tighten first, then secure with a screwdriver to avoid over-torquing.
2. Install Center Supports
Add any vertical dividers or ribs. Use the included alignment pins to ensure square corners and consistent spacing for shelves and doors.
3. Add the Back Panel
Align the back panel and fasten it evenly along the edges. This locks the frame square and greatly increases stability. Ensure cable cutouts align with compartments.
4. Fit Doors and Drawers
Attach hinges according to the guide. Adjust hinge screws to achieve consistent gaps. For drawers, confirm smooth glide and equal reveal.
5. Secure the Top Panel
Place the top panel, confirm alignment on all corners, then secure. Avoid overtightening to protect the finish and threads.
6. Final Leveling and Safety
Use a level to check the top surface. Install included anti-tip hardware if applicable. Route cables through the rear cutouts to keep airflow unobstructed.
Pro Tips
- Set a drill clutch to a low setting to prevent stripping cam locks.
- Protect visible surfaces with a soft cloth whenever turning the unit.
- Adjust doors with the three hinge screws: height, depth, and side-to-side.
- Keep extra fasteners in a labeled bag for future maintenance.
Frequently Asked Questions
How long does assembly take?
Most customers complete setup in 30–60 minutes for compact models and up to 90 minutes for larger units.
Can one person assemble it?
Yes, though a second person helps when attaching large panels and aligning doors precisely.
What if I’m missing hardware?
Contact our support with your order details. We’ll ship replacement hardware promptly.
Recommended Accessories
Consider cable sleeves, adhesive cable clips, and felt pads to protect floors and streamline your setup.